The focus for Mori Seiki is ‘Pure Technology’ with eight machine tools, including
new machining centres and lathes, on show.
Mori Seiki (machining): Stand 5280
MORI SEIKI’s stand features eight machine tools,
including the new NMV5000 DCG 5-axis
machining centre; the NZ2000 T2Y2 multiaxis
turning centre with two spindles, two
turrets and two Y axes; the
NT4250/1500 SZ mill-turn
centre; two NL series lathes;
the NH5000 twin pallet
horizontal machining centre;
a DuraTurn 2550; and a
DuraVertical 5100.
‘Pure Technology’ applies
to all machines on the stand
and encompasses DCG (Driven
at the Centre of Gravity), DDM (Direct Drive
Motor), ORC (Octagonal Ram Construction) and
BMT (Built-in Motor Turret) to achieve low levels of
vibration and high levels of rigidity and speed.
The new NMV5000 uses DCG, DDM and ORC
technology. Twin lead screws on both Y and Z axes
move the machine through its centre of gravity,
eliminating out of balance forces. Direct drive
motors on B and C axes achieve precise, backlash-
Risk is a game.
Not part of
your business.
We Own Precision
Vlier has set the industry standard for excellence since 1943, crafting the
highest quality, most precisely designed components in the business.
With a legacy that began with the famed “Vlier Pin,” Vlier has leveraged
advanced technologies and an obsession for quality to become the tooling
component leader in:
april 2008
Spring Loaded Devices
Quick Release Plungers
Ball Lock Pins
Leveling Devices
For more information visit www.vlier.com or call Vlier at 1.800.821.1090.
www.mach2008.com mach preview
free rotary movements, and produce 1200rev/min
on the B axis as well as a 340 degrees range on the
C axis. Symmetrical design of the octagonal ram
on the Z axis combines rigidity with
thermal stability.
Both turrets on the NZ2000
T2Y2 use BMT. The built in motors
eliminate vibration associated with
gears and belts, offer lower heat
development characteristics,
improve power transmission and
accuracy. An option is a third lower
turret which uses an ORC
octagonal ram, compensating for
thermal distortion and allowing stable linear
guidance at high speed.
In addition to the NT4250/1500 SZ, Mori Seiki
will be displaying a second NT machine
‘undressed’ so that visitors will be able to see the
engineering behind its ‘Pure Technology’, as well
as the massive castings which go into every
machine the company supplies.
MAPPS III, Mori Seiki’s interactive control
Enquiry Number: 36
system, gets its own area. Simplicity of operation,
3D functionality and collision avoidance are
features necessary to cope with increasing
complexity of its new machines. Integrating
machines via a network is a useful aid to
productivity. MORI-NET, eases the management of
NC programmes, allows communication with the
machine operator, and offers real-time monitoring
of machine performance.
Mandrels and jaws from Tobler workholding, a
recent acquisition by Mori Seiki, will be displayed
as well as information about, and products
manufactured on, DIXI machines. Mori Seiki
acquired the Swiss machine manufacturer in
January 2007 to expand its product range and offer
a complete integrated service to its customers.
www.moriseiki.co.uk
FEATURED PRODUCTS:
High Quality, Low Cost, Readily Available
HIGH VALUE
LEVELING DEVICE
Stud & Socket styles
Zinc/Gold Chromate,
Stainless & Nickel options
VLIER-LOCK BALL
LOCK PINS
T- and Button-handle
confi gurations
Stainless steel shaft
Aluminum handle
For over 60 years, Vlier has been the manufacturer-of-choice
for engineers in a multitude of industries.
www.vlier.com
MWP
51
To view a Ceros magazine you need to have JavaScript enabled in your browser and have the flash player 8 or higher installed. To install the latest flash player, click the icon above, install the flash plugin and then click here to refresh this page.